[dart-misc] Raspberry Pi Zero, build instructions for older versions of the dart-sdk

It looks like ARMv6 (Pi 1 and Pi 0) are broken after 1.13 on the switch to
boringssl, which is why "Hello, world!" works, but pub fails.

If you can get a 1.12.2 stable checkout, you should be able to use the
raspberry pi toolchain to build and run on the Pi 1 and Pi 0.

I'm not sure off the top of my head how to get a source checkout of an
older stable branch, but hopefully someone else on the list can chime in.

Cheers,
Zach

Post by seb mitchell
Hi, have built dart for my raspberry pi zero, using the cool debian
instructions
https://github.com/dart-lang/sdk/wiki/Building-Dart-SDK-on-Debian
and using the tool chain from
https://www.raspberrypi.org/documentation/linux/kernel/building.md
A simple hello world works, but a pub get fails with a Segmentation fault
on the pi zero
Dart VM version: 1.14.0-edge
A build for raspberry pi 2, ARMv7, works fine.
Wondering if the 1.13.2 release build would have the same issue.
So how do I build for an older versions of the dart-sdk?
I have been using usb otg networking with the pi zero,
http://pi.gbaman.info/?p=699
Maybe I should just wait for Fletch support, but it would be nice to have
the full dart sdk for these older chips.
--
For other discussions, see https://groups.google.com/a/dartlang.org/
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google Groups
"Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it, send an

'Rico Wind' via Dart Misc

2016-01-14 17:26:26 UTC

On Thu, Jan 14, 2016 at 6:24 PM, 'Zach Anderson' via Dart Misc <

Post by 'Zach Anderson' via Dart Misc
It looks like ARMv6 (Pi 1 and Pi 0) are broken after 1.13 on the switch to
boringssl, which is why "Hello, world!" works, but pub fails.
If you can get a 1.12.2 stable checkout, you should be able to use the
raspberry pi toolchain to build and run on the Pi 1 and Pi 0.

git checkout 1.12.2
gclient sync

Cheers,
Rico

Post by 'Zach Anderson' via Dart Misc
I'm not sure off the top of my head how to get a source checkout of an
older stable branch, but hopefully someone else on the list can chime in.
Cheers,
Zach

--
For other discussions, see https://groups.google.com/a/dartlang.org/
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google Groups
"Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it, send an

'Rico Wind' via Dart Misc

2016-01-14 17:27:19 UTC

Post by 'Rico Wind' via Dart Misc
On Thu, Jan 14, 2016 at 6:24 PM, 'Zach Anderson' via Dart Misc <

Post by 'Zach Anderson' via Dart Misc
It looks like ARMv6 (Pi 1 and Pi 0) are broken after 1.13 on the switch
to boringssl, which is why "Hello, world!" works, but pub fails.
If you can get a 1.12.2 stable checkout, you should be able to use the
raspberry pi toolchain to build and run on the Pi 1 and Pi 0.

git checkout 1.12.2
gclient sync

Assumes that you have an unmanged checkout ( "managed": False in your
.gclient file)

Cheers,
Rico

Post by 'Rico Wind' via Dart Misc
Cheers,
Rico

Post by 'Zach Anderson' via Dart Misc
I'm not sure off the top of my head how to get a source checkout of an
older stable branch, but hopefully someone else on the list can chime in.
Cheers,
Zach

Post by seb mitchell
Hi, have built dart for my raspberry pi zero, using the cool debian
instructions
https://github.com/dart-lang/sdk/wiki/Building-Dart-SDK-on-Debian
and using the tool chain from
https://www.raspberrypi.org/documentation/linux/kernel/building.md
A simple hello world works, but a pub get fails with a Segmentation
fault on the pi zero
Dart VM version: 1.14.0-edge
A build for raspberry pi 2, ARMv7, works fine.
Wondering if the 1.13.2 release build would have the same issue.
So how do I build for an older versions of the dart-sdk?
I have been using usb otg networking with the pi zero,
http://pi.gbaman.info/?p=699
Maybe I should just wait for Fletch support, but it would be nice to
have the full dart sdk for these older chips.
--
For other discussions, see https://groups.google.com/a/dartlang.org/
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to
http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google
Groups "Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it, send

--
For other discussions, see https://groups.google.com/a/dartlang.org/
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google Groups
"Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it, send an

Jan Mostert

2016-01-14 18:31:33 UTC

I've compiled 1.13.2 from source this morning without problems on CentOS7,
had similar issues on older CentOS versions seeing segfaults.

Post by 'Rico Wind' via Dart Misc
On Thu, Jan 14, 2016 at 6:24 PM, 'Zach Anderson' via Dart Misc <

Post by 'Zach Anderson' via Dart Misc
It looks like ARMv6 (Pi 1 and Pi 0) are broken after 1.13 on the switch
to boringssl, which is why "Hello, world!" works, but pub fails.
If you can get a 1.12.2 stable checkout, you should be able to use the
raspberry pi toolchain to build and run on the Pi 1 and Pi 0.

git checkout 1.12.2
gclient sync

Assumes that you have an unmanged checkout ( "managed": False in your
.gclient file)
Cheers,
Rico

Post by 'Rico Wind' via Dart Misc
Cheers,
Rico

Post by 'Zach Anderson' via Dart Misc
I'm not sure off the top of my head how to get a source checkout of an
older stable branch, but hopefully someone else on the list can chime in.
Cheers,
Zach

Post by seb mitchell
Hi, have built dart for my raspberry pi zero, using the cool debian
instructions
https://github.com/dart-lang/sdk/wiki/Building-Dart-SDK-on-Debian
and using the tool chain from
https://www.raspberrypi.org/documentation/linux/kernel/building.md
A simple hello world works, but a pub get fails with a Segmentation
fault on the pi zero
Dart VM version: 1.14.0-edge
A build for raspberry pi 2, ARMv7, works fine.
Wondering if the 1.13.2 release build would have the same issue.
So how do I build for an older versions of the dart-sdk?
I have been using usb otg networking with the pi zero,
http://pi.gbaman.info/?p=699
Maybe I should just wait for Fletch support, but it would be nice to
have the full dart sdk for these older chips.
--
For other discussions, see https://groups.google.com/a/dartlang.org/
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to
http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google
Groups "Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it, send

--
For other discussions, see https://groups.google.com/a/dartlang.org/
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to
http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google
Groups "Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it, send

For other discussions, see https://groups.google.com/a/dartlang.org/
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google Groups
"Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it, send an

Jan Mostert

2016-01-14 18:43:14 UTC

# build dart

cd /usr/src

mkdir dart

cd dart

git clone https://chromium.googlesource.com/chromium/tools/depot_tools.git

git clone https://github.com/dart-lang/sdk.git -b *stable # <- change to
the branch you want to build*

export PATH=$PATH:`pwd`/depot_tools

gclient config --name=sdk --unmanaged ***@github.com:dart-lang/sdk.git

gclient sync # --jobs=1 --verbose

gclient runhooks

cd sdk

tools/build.py --mode=release --arch=x64 create_sdk

out/ReleaseX64/dart --version

Post by Jan Mostert
I've compiled 1.13.2 from source this morning without problems on CentOS7,
had similar issues on older CentOS versions seeing segfaults.

Post by 'Rico Wind' via Dart Misc
On Thu, Jan 14, 2016 at 6:24 PM, 'Zach Anderson' via Dart Misc <

Post by 'Zach Anderson' via Dart Misc
It looks like ARMv6 (Pi 1 and Pi 0) are broken after 1.13 on the switch
to boringssl, which is why "Hello, world!" works, but pub fails.
If you can get a 1.12.2 stable checkout, you should be able to use the
raspberry pi toolchain to build and run on the Pi 1 and Pi 0.

git checkout 1.12.2
gclient sync

Assumes that you have an unmanged checkout ( "managed": False in your
.gclient file)
Cheers,
Rico

Post by 'Rico Wind' via Dart Misc
Cheers,
Rico

Post by 'Zach Anderson' via Dart Misc
I'm not sure off the top of my head how to get a source checkout of an
older stable branch, but hopefully someone else on the list can chime in.
Cheers,
Zach

Post by seb mitchell
Hi, have built dart for my raspberry pi zero, using the cool debian
instructions
https://github.com/dart-lang/sdk/wiki/Building-Dart-SDK-on-Debian
and using the tool chain from
https://www.raspberrypi.org/documentation/linux/kernel/building.md
A simple hello world works, but a pub get fails with a Segmentation
fault on the pi zero
Dart VM version: 1.14.0-edge
A build for raspberry pi 2, ARMv7, works fine.
Wondering if the 1.13.2 release build would have the same issue.
So how do I build for an older versions of the dart-sdk?
I have been using usb otg networking with the pi zero,
http://pi.gbaman.info/?p=699
Maybe I should just wait for Fletch support, but it would be nice to
have the full dart sdk for these older chips.
--
For other discussions, see https://groups.google.com/a/dartlang.org/
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to
http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google
Groups "Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it, send

--
For other discussions, see https://groups.google.com/a/dartlang.org/
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to
http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google
Groups "Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it, send

seb mitchell

2016-01-16 07:47:23 UTC

Thanks guys, found that the release build, 1.13.2, has same "Segmentation
fault" on my raspberry pi zero, but older release 1.12.2 was fine,
so maybe it the new ssl library.

So to build raspberry pi armv6 dart ver 1.12.2

Get the toolchain
via https://www.raspberrypi.org/documentation/linux/kernel/building.md

cd /usr/src
mkdir rpitoolchain
git clone https://github.com/raspberrypi/tools

cd /usr/src
mkdir dart
cd dart
git clone https://chromium.googlesource.com/chromium/tools/depot_tools.git
git clone https://github.com/dart-lang/sdk.git -b 1.12.2 # <- change to
the branch you want to build
export PATH=$PATH:`pwd`/depot_tools

gclient config --name=sdk --unmanaged ***@github.com:dart-lang/sdk.git
gclient sync # --jobs=1 --verbose
gclient runhooks

cd sdk
tools/build.py --mode=release --arch=arm
--toolchain=/usr/src/rpitoolchain/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian-x64/bin/arm-linux-gnueabihf
create_sdk

To get it to my pi zero

cd out/ReleaseXARM

Post by Jan Mostert
# build dart
cd /usr/src
mkdir dart
cd dart
git clone https://chromium.googlesource.com/chromium/tools/depot_tools.git
git clone https://github.com/dart-lang/sdk.git -b 1.12.2* # <- change to
the branch you want to build*
export PATH=$PATH:`pwd`/depot_tools
gclient sync # --jobs=1 --verbose
gclient runhooks
cd sdk
tools/build.py --mode=release --arch=arm create_sdk
out/ReleaseX64/dart --version

Post by Jan Mostert
I've compiled 1.13.2 from source this morning without problems on
CentOS7, had similar issues on older CentOS versions seeing segfaults.

Post by 'Rico Wind' via Dart Misc
On Thu, Jan 14, 2016 at 6:24 PM, 'Zach Anderson' via Dart Misc <

Post by 'Zach Anderson' via Dart Misc
It looks like ARMv6 (Pi 1 and Pi 0) are broken after 1.13 on the
switch to boringssl, which is why "Hello, world!" works, but pub fails.
If you can get a 1.12.2 stable checkout, you should be able to use the
raspberry pi toolchain to build and run on the Pi 1 and Pi 0.

git checkout 1.12.2
gclient sync

Assumes that you have an unmanged checkout ( "managed": False in your
.gclient file)
Cheers,
Rico

Post by 'Rico Wind' via Dart Misc
Cheers,
Rico

Post by 'Zach Anderson' via Dart Misc
I'm not sure off the top of my head how to get a source checkout of an
older stable branch, but hopefully someone else on the list can chime in.
Cheers,
Zach

Post by seb mitchell
Hi, have built dart for my raspberry pi zero, using the cool debian
instructions
https://github.com/dart-lang/sdk/wiki/Building-Dart-SDK-on-Debian
and using the tool chain from
https://www.raspberrypi.org/documentation/linux/kernel/building.md
A simple hello world works, but a pub get fails with a Segmentation
fault on the pi zero
Dart VM version: 1.14.0-edge
A build for raspberry pi 2, ARMv7, works fine.
Wondering if the 1.13.2 release build would have the same issue.
So how do I build for an older versions of the dart-sdk?
I have been using usb otg networking with the pi zero,
http://pi.gbaman.info/?p=699
Maybe I should just wait for Fletch support, but it would be nice to
have the full dart sdk for these older chips.
--
For other discussions, see https://groups.google.com/a/dartlang.org/
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to
http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google
Groups "Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it,

--
For other discussions, see https://groups.google.com/a/dartlang.org/
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to
http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google
Groups "Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it, send

For other discussions, see https://groups.google.com/a/dartlang.org/
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to
http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google
Groups "Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it, send

'William Hesse' via Dart Misc

2016-01-22 12:05:51 UTC

I have filed an issue for the failure of Dart 1.13 and 1.14 on ARM v6:
https://github.com/dart-lang/sdk/issues/25562
We need to verify its cause, and decide on a solution.

Post by seb mitchell
Thanks guys, found that the release build, 1.13.2, has same "Segmentation
fault" on my raspberry pi zero, but older release 1.12.2 was fine,
so maybe it the new ssl library.
So to build raspberry pi armv6 dart ver 1.12.2
Get the toolchain via
https://www.raspberrypi.org/documentation/linux/kernel/building.md
cd /usr/src
mkdir rpitoolchain
git clone https://github.com/raspberrypi/tools
cd /usr/src
mkdir dart
cd dart
git clone https://chromium.googlesource.com/chromium/tools/depot_tools.git
git clone https://github.com/dart-lang/sdk.git -b 1.12.2 # <- change to the
branch you want to build
export PATH=$PATH:`pwd`/depot_tools
gclient sync # --jobs=1 --verbose
gclient runhooks
cd sdk
tools/build.py --mode=release --arch=arm
--toolchain=/usr/src/rpitoolchain/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian-x64/bin/arm-linux-gnueabihf
create_sdk
To get it to my pi zero
cd out/ReleaseXARM

Post by Jan Mostert
# build dart
cd /usr/src
mkdir dart
cd dart
git clone https://chromium.googlesource.com/chromium/tools/depot_tools.git
git clone https://github.com/dart-lang/sdk.git -b 1.12.2 # <- change to
the branch you want to build
export PATH=$PATH:`pwd`/depot_tools
gclient sync # --jobs=1 --verbose
gclient runhooks
cd sdk
tools/build.py --mode=release --arch=arm create_sdk
out/ReleaseX64/dart --version

Post by Jan Mostert
I've compiled 1.13.2 from source this morning without problems on
CentOS7, had similar issues on older CentOS versions seeing segfaults.

Post by 'Rico Wind' via Dart Misc
On Thu, Jan 14, 2016 at 6:24 PM, 'Zach Anderson' via Dart Misc

Post by 'Zach Anderson' via Dart Misc
It looks like ARMv6 (Pi 1 and Pi 0) are broken after 1.13 on the
switch to boringssl, which is why "Hello, world!" works, but pub fails.
If you can get a 1.12.2 stable checkout, you should be able to use the
raspberry pi toolchain to build and run on the Pi 1 and Pi 0.

git checkout 1.12.2
gclient sync

Assumes that you have an unmanged checkout ( "managed": False in your
.gclient file)
Cheers,
Rico

Post by 'Rico Wind' via Dart Misc
Cheers,
Rico

Post by 'Zach Anderson' via Dart Misc
I'm not sure off the top of my head how to get a source checkout of an
older stable branch, but hopefully someone else on the list can chime in.
Cheers,
Zach

Post by seb mitchell
Hi, have built dart for my raspberry pi zero, using the cool debian
instructions
https://github.com/dart-lang/sdk/wiki/Building-Dart-SDK-on-Debian
and using the tool chain from
https://www.raspberrypi.org/documentation/linux/kernel/building.md
A simple hello world works, but a pub get fails with a Segmentation
fault on the pi zero
Dart VM version: 1.14.0-edge
A build for raspberry pi 2, ARMv7, works fine.
Wondering if the 1.13.2 release build would have the same issue.
So how do I build for an older versions of the dart-sdk?
I have been using usb otg networking with the pi zero,
http://pi.gbaman.info/?p=699
Maybe I should just wait for Fletch support, but it would be nice to
have the full dart sdk for these older chips.
--
For other discussions, see https://groups.google.com/a/dartlang.org/
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to
http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google
Groups "Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it,

--
For other discussions, see https://groups.google.com/a/dartlang.org/
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to
http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google
Groups "Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it, send

--
For other discussions, see https://groups.google.com/a/dartlang.org/
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google Groups
"Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it, send an

--
William Hesse

seb mitchell

2016-01-22 12:15:18 UTC

Cool, nice to have it fixed.

Have updated the issue with what a I get with a --mode=debug build for
1.14.0-dev.7.2
and gdb stuff.

Post by 'William Hesse' via Dart Misc
https://github.com/dart-lang/sdk/issues/25562
We need to verify its cause, and decide on a solution.

Post by seb mitchell
Thanks guys, found that the release build, 1.13.2, has same

"Segmentation

Post by seb mitchell
fault" on my raspberry pi zero, but older release 1.12.2 was fine,
so maybe it the new ssl library.
So to build raspberry pi armv6 dart ver 1.12.2
Get the toolchain via
https://www.raspberrypi.org/documentation/linux/kernel/building.md
cd /usr/src
mkdir rpitoolchain
git clone https://github.com/raspberrypi/tools
cd /usr/src
mkdir dart
cd dart
git clone

https://chromium.googlesource.com/chromium/tools/depot_tools.git

Post by seb mitchell
git clone https://github.com/dart-lang/sdk.git -b 1.12.2 # <- change

to the

Post by seb mitchell
branch you want to build
export PATH=$PATH:`pwd`/depot_tools
gclient sync # --jobs=1 --verbose
gclient runhooks
cd sdk
tools/build.py --mode=release --arch=arm

--toolchain=/usr/src/rpitoolchain/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian-x64/bin/arm-linux-gnueabihf

Post by seb mitchell
create_sdk
To get it to my pi zero
cd out/ReleaseXARM

Post by Jan Mostert
# build dart
cd /usr/src
mkdir dart
cd dart
git clone

https://chromium.googlesource.com/chromium/tools/depot_tools.git

Post by Jan Mostert
git clone https://github.com/dart-lang/sdk.git -b 1.12.2 # <- change

Post by Jan Mostert
the branch you want to build
export PATH=$PATH:`pwd`/depot_tools
gclient sync # --jobs=1 --verbose
gclient runhooks
cd sdk
tools/build.py --mode=release --arch=arm create_sdk
out/ReleaseX64/dart --version

Post by Jan Mostert
I've compiled 1.13.2 from source this morning without problems on
CentOS7, had similar issues on older CentOS versions seeing segfaults.
On Thu, 14 Jan 2016, 19:27 'Rico Wind' via Dart Misc <

Post by 'Rico Wind' via Dart Misc
On Thu, Jan 14, 2016 at 6:24 PM, 'Zach Anderson' via Dart Misc

Post by 'Zach Anderson' via Dart Misc
It looks like ARMv6 (Pi 1 and Pi 0) are broken after 1.13 on the
switch to boringssl, which is why "Hello, world!" works, but pub

fails.

Post by 'Zach Anderson' via Dart Misc
If you can get a 1.12.2 stable checkout, you should be able to use

the

Post by 'Zach Anderson' via Dart Misc
raspberry pi toolchain to build and run on the Pi 1 and Pi 0.

git checkout 1.12.2
gclient sync

Assumes that you have an unmanged checkout ( "managed": False in your
.gclient file)
Cheers,
Rico

Post by 'Rico Wind' via Dart Misc
Cheers,
Rico

Post by 'Zach Anderson' via Dart Misc
I'm not sure off the top of my head how to get a source checkout of

Post by 'Zach Anderson' via Dart Misc
older stable branch, but hopefully someone else on the list can

chime in.

Post by 'Zach Anderson' via Dart Misc
Cheers,
Zach

Post by seb mitchell
Hi, have built dart for my raspberry pi zero, using the cool

debian

Post by seb mitchell
instructions
https://github.com/dart-lang/sdk/wiki/Building-Dart-SDK-on-Debian
and using the tool chain from
https://www.raspberrypi.org/documentation/linux/kernel/building.md
A simple hello world works, but a pub get fails with a

Segmentation

Post by seb mitchell
fault on the pi zero
Dart VM version: 1.14.0-edge
A build for raspberry pi 2, ARMv7, works fine.
Wondering if the 1.13.2 release build would have the same issue.
So how do I build for an older versions of the dart-sdk?
I have been using usb otg networking with the pi zero,
http://pi.gbaman.info/?p=699
Maybe I should just wait for Fletch support, but it would be nice

Post by seb mitchell
have the full dart sdk for these older chips.
--
For other discussions, see

https://groups.google.com/a/dartlang.org/

Post by seb mitchell
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to
http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google
Groups "Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it,

--
For other discussions, see

https://groups.google.com/a/dartlang.org/

Post by 'Zach Anderson' via Dart Misc
For HOWTO questions, visit http://stackoverflow.com/tags/dart
To file a bug report or feature request, go to
http://www.dartbug.com/new
---
You received this message because you are subscribed to the Google
Groups "Dart Misc" group.
To unsubscribe from this group and stop receiving emails from it,

send